KRAFTDXF

Free tool

Free Bridge Width Calculator

Type your plate thickness and get the narrowest bridge — the strip of metal between two cuts — that is safe to draw, in millimetres and inches. Then check your own design's bridge against it. Free, no sign-in.

—minimum finished bridge (2 × thickness)
—draw it at least this wide
—minimum letter stroke
—your design

Don't measure bridges by hand

KraftDXF measures every bridge in your design against your plate, widens the ones that are too thin, and lists every change. Upload a design image, an SVG or a DXF.

Open the app — first 5 files free

The rule behind the number

A bridge should be at least 2 × the plate thickness, measured at its narrowest point, after the cut has taken its share. The cut removes a thin slot of metal — the kerf — half from each side of the line. So a bridge between two cuts loses one full kerf width in total: if your drawing is not kerf-adjusted, draw the bridge one kerf wider than the minimum. The same number is the minimum stroke width for cut-out letters. Read the full bridge width guide and the minimum letter size guide.

The rule removes the most common cause of failed bridges. It cannot guarantee a cut: material, heat build-up in dense patterns and machine settings matter too. Test-cut a new design.

Common questions

What is the minimum bridge width for 3 mm steel?

6 mm. The rule is 2 × the plate thickness, measured at the narrowest point after the cut has removed its kerf.

Do I add the kerf to the bridge?

Only if your file is drawn at finished size. The cut removes one kerf width from a bridge in total (half from each side), so draw the bridge one kerf wider than the minimum. A kerf-adjusted file already allows for it.

Is the rule different for plasma and laser?

The 2 × thickness rule is the same starting point for both. Plasma has a wider kerf and puts more heat into the plate, so it needs the kerf allowance more and suits bolder designs.

Is this calculator free?

Yes. It runs in your browser with no sign-in, and nothing you type is sent anywhere.